MA Stretch Code 2021 in New Bedford, MA

Complete IECC 2021 MA Stretch Code compliance services for new construction in New Bedford, MA — from plan review through HERS Rating, blower door testing, and final certification.

RESNET Certified
Mass Save Qualified
24-Hour Reports
MA Stretch Code Experts
Serving New Bedford, MA

2026 Massachusetts Energy Code Facts — New Bedford

New Bedford enforces the Massachusetts Stretch Energy Code (225 CMR 22), adopted effective 7/1/2017. Under the 2025 code update (current for 2026 permits), new homes in New Bedford must reach a maximum HERS Index of 42 (mixed-fuel) or 45 (all-electric) — up to 48 with qualifying credits — verified by a RESNET-certified HERS rater. ADUs must meet HERS 52–58, and major alterations, additions or change-of-use projects HERS 65–75, depending on fuel type and on-site solar.

  • Energy code status: Stretch Code (effective 7/1/2017) — 1 of 242 MA municipalities (as of the June 2026 Mass.gov adoption list).
  • Required testing & verification: blower door (air infiltration) testing, duct leakage testing, balanced mechanical ventilation (ERV/HRV), plus EV-ready and solar-ready provisions on the HERS compliance path.
  • Mass Save® 2026 new-construction incentives: up to $25,000 per all-electric single-family home (Passive House tier; $7,500 base tier, $15,000 ENERGY STAR® NextGen tier — HERS ≤45), up to $40,000 for a 4-unit building, up to $3,750/unit for 5+ unit multifamily, and up to $30,000 for major all-electric renovations. Every tier requires enrollment and verification by an approved HERS rating company.

Related New Bedford services: HERS Rating New Bedford · Blower Door Testing New Bedford · Duct Leakage Testing New Bedford · MA Energy Codes Guide — or get a free quote from our RESNET-certified team (617-584-1809).

Sources: 2025 DOER Massachusetts Stretch & Specialized Codes Technical Guidance (Sept 2025); Mass.gov Building Energy Code Adoption by Municipality (June 2026); Mass Save 2026 Residential New Construction program.

HERS Rating New Bedford MA — Stretch Code compliance testing for an energy efficient home in New Bedford, Massachusetts
On-site Stretch Code compliance testing by our RESNET-certified team serving New Bedford, Massachusetts.

Common Questions About the New Bedford Energy Code

Do I need a HERS rating for a new home in New Bedford?

Yes. New Bedford has enforced the Massachusetts Stretch Energy Code since 7/1/2017, so new dwellings need a certified HERS rating from a RESNET-accredited rater — with blower door and duct leakage testing — before the certificate of occupancy.

What HERS score is required in New Bedford?

Homes permitted in New Bedford today must score HERS 42 or lower (mixed-fuel) or HERS 45 or lower (all-electric), up to 48 with qualifying credits. ADUs fall in the HERS 52–58 range and major alterations/additions in the 65–75 range, depending on fuel type and on-site solar.

Which energy code does New Bedford follow in 2026?

New Bedford is one of 242 of Massachusetts’ 351 municipalities enforcing the Stretch Energy Code (225 CMR 22) per the June 2026 Mass.gov adoption list; 60 towns have gone further to the Specialized Code and 49 remain on the Base Code.

Official Maximum HERS Index Scores (Table R406.5)

These are the official maximum HERS Index scores that apply to projects in New Bedford under Table R406.5 of the current code (2025 DOER Technical Guidance):

Building typeNew construction (permits after 7/1/2024)New construction w/ embodied-carbon credit (R406.5.2)Accessory Dwelling UnitsMajor alterations, additions, change of use
Mixed-fuel building42455265
Mixed-fuel + solar electric42455570
All-electric building45485570
All-electric + solar electric45485875

Scores are measured before counting on-site renewable generation (per R406.5). Historic buildings may opt out for alterations under R503.1.1. Embodied-carbon credits (+3 points) come from low-GWP concrete and insulation EPDs per Table R406.5.3/R406.5.4.

Complete Stretch Code Compliance Requirements in New Bedford

Beyond the HERS maximums above, every new dwelling in New Bedford on the HERS pathway must satisfy four code sections — R403.6 (Ventilation), R404.4 (EV Ready), R406 (HERS) and Appendix RB (Solar Ready) — per the 2025 DOER Technical Guidance:

  • Balanced mechanical ventilation (R403.6): an ERV or HRV system meeting minimum system airflow, heat/energy-recovery efficiency, fan sound ratings and regulated air-inlet and exhaust locations — verified by field testing.
  • EV-Ready parking (R404.4): pre-wiring with a connection point and dedicated electrical panel capacity for future vehicle charging.
  • Solar-Ready roof (Appendix RB): a dedicated solar zone with structural-load verification, an electrical interconnection pathway and reserved panel space — unless the project installs solar directly.
  • Air-tightness & duct sealing: blower door result of 3.0 ACH50 or lower (Climate Zone 5) and duct leakage within 4 CFM25 per 100 sq ft.

Passive House alternative (R405): Phius or PHI certification satisfies the code in New Bedford in place of a HERS score — with a Certified Passive House Consultant for design and a Phius Certified Verifier/Rater during construction — and still requires EV-Ready and Solar-Ready compliance. Prescriptive path: allowed only for buildings without individually separate dwelling units, additions, and alterations — and a whole-building prescriptive project must implement 2 of the 3 additional-efficiency packages in R408 (enhanced envelope, higher-efficiency HVAC, or reduced water-heating energy). Additions of 1,000 sq ft or more (or exceeding 100% of the existing floor area) must meet both R502.3 prescriptive and the R406.5 HERS limits. Level III alterations (work area over 50% of the home and over 1,000 sq ft) also trigger HERS compliance; historic buildings are exempt under R501.6. Note that ENERGY STAR® is no longer a compliance path — HERS and Passive House are the two certification routes in New Bedford.

Detail sourced from the 2025 Massachusetts Stretch & Specialized Codes Technical Guidance (DOER, Sept 2025), Table R406.5 and Appendix RC.

Professional MA Stretch Code 2021 Services in New Bedford, Massachusetts

Complete IECC 2021 MA Stretch Code compliance services for new construction in New Bedford, MA — from plan review through HERS Rating, blower door testing, and final certification. Our RESNET-certified raters serve New Bedford and all 351 Massachusetts cities and towns.

New Bedford requires HERS ≤55, blower door ≤3.0 ACH50, and duct leakage testing for all new residential construction under the MA Stretch Code. HERS Rating Company manages the complete compliance process from initial energy modeling through on-site testing and certified report delivery.

Our MA Stretch Code 2021 Process in New Bedford

  • Free Quote: Contact us for a transparent, no-surprise quote for your New Bedford project.
  • Plans Review: For new construction, we review building plans and create an energy model before construction begins.
  • Site Inspection: Our RESNET-certified rater visits your New Bedford property and performs all required testing.
  • 24-Hour Report: You receive your certified report within 24 hours, ready for Mass Save, code inspectors, or green building programs.

Related Services in New Bedford

FAQs: MA Stretch Code 2021 in New Bedford, MA

Does New Bedford require MA Stretch Code compliance?

Yes — New Bedford has adopted the MA Stretch Code (IECC 2021), requiring all new residential construction to meet enhanced efficiency standards.

What does Stretch Code compliance cost in New Bedford?

Full Stretch Code compliance services in New Bedford typically cost $600–$1,200 for a single-family home. Contact us for a free quote.

How do I prove Stretch Code compliance in New Bedford?

You need certified HERS (≤55), blower door (≤3.0 ACH50), and duct leakage reports. We provide all documentation.

What are the MA Stretch Code requirements in New Bedford?

New Bedford’s Stretch Code requires: HERS score ≤55, blower door ≤3.0 ACH50, and duct leakage ≤4 CFM25 per 100 sq ft.

More MA Stretch Code 2021 Services Near New Bedford

Ready for MA Stretch Code 2021 in New Bedford?

Serving New Bedford and all 351 Massachusetts cities. RESNET certified, 24-hour turnaround.

Also Serving Nearby Cities

We provide MA Stretch Code Compliance services throughout the region. Nearby cities we serve: Fairhaven · Acushnet · Dartmouth · Westport · Freetown

At HERS Rating Company, we are committed to providing the highest quality energy consulting services to homebuilders, architects, and developers across Massachusetts.

6175841809

24/7 Support

Newsletter

Sign up for our newsletter to receive exclusive updates, tips, and insights about energy-efficient building practices, financial incentives, and the latest energy code requirements in Massachusetts.

You have been successfully Subscribed! Ops! Something went wrong, please try again.

12 Pond St Ashland, MA 01721 United States

573 Washington St Quincy, MA 02169 United States

Scroll to Top